Friday, October 11, 2013

How To Install CWM Custom Recovery In Colors Xfactor Quad (X110Q)

Join our group of Xfactor Quad on Facebook
Xfactar quad
Hey Guys, After a long wait finally I have finally ported a working CWM recovery for xfactor quad. Thanks to developers who made such easy and handy recovery porting tools. 

(Note : I have successfully installed this CWM on my device with this method but I cannot assure this will work on yours device. Do at your own risk, I am not responsible if your device bricked or exploded or get any kind of damage.)

1) CWM Recovery (Download Here)
2) SP Flash Tool (Download Here)
3) Drivers For Xfactor Quad (Vcom Drivers Needed to use with SP Flash Tool) (Download Here)
 Let's Start
1) Download and Extract SP Flash tool from above Link
2) Extract VCOM Drivers on Desktop and install it by clicking in InstallDriver.exe
3) After Successfully Installed Driver Start SP Flash tool from Extracted Folder
4) Click on File and select open scatter Loading file 

5) Select Scatter loading file from extracted Ported-CWM Folder click Open
 6) CWM Recovery should automatic Loaded, if not make sure you have selected proper CWM Recovery.img

Select Window Menu then click on Write Memory
 8) Go to Write Memory, click on Open RAW image, select proper CWM recovery.img, Click on  EMMC, set the values as shown in the Image below 
9) Remove your phone if connected to USB, Switch it off, we need it switched off only dont connect USB yet,Click on Write Memory button as shown in below image, after clicking that button then Connect your phone to USB cable (in switched off mode) if you have installed drivers properly it will start the process

 10) After PreLoader Finishes, Recovery.img will be pushed to your phone, (you will see green bar loading)

Congratulations You have successfully installed CWM Recovery,
To boot into Recovery, 
Press and Hold Volume+ key and Power On key for 5-10 Seconds and Done!
You will see following in recovery


Post a Comment